Autochrome

The autochrome is an early color photography process, patented the 17th December 1903 by Auguste and Louis Lumière.

Before the commercialization, they diffused the autochrome technique to some favored photographers, like Sergey Prokudin-Gorsky. The commercialization started in 1907 and the technique was used between 1907 and about 1932. A lot of photos of the First World War were made using it.

Fernand Cuville, Two French soldiers work at a smith’s hearth in a forge destroyed by grenades, 1917.

It is the first industrial technique of color photography. Contrary to the others techniques of the period, the process uses an additive method which records the image on a single photographic plate. The autochrome gives positive images on glass, so they are transparent and were often used for screenings or stereoscopic view.

Stereo Richard autochrome viewer.

The plates are made by dredging a glass plate with millions of microscopic particles (10 to 20 micrometers) – of potato – dyed in red, green and blue, and stick on it with resin. The gaps are filled with very fine carbon powder. This filter is sealed by a lacquer that protect it during the development of the picture. The color rendering depends on the chemical, so it is an interpretation of the reality.  This imperfection gives a pictorial dimension to autochromes.

Autochromes did not need specific camera. It encountered a great success right from the beginning, which persisted until the discovering of new techniques in the early 1930s. 

The exposure time is about one second. Then, the photos were staged, giving them an old-fashioned charm.

Arnold Genthe, Autochrome for the Book of Dance, 1920.

Similar Posts

  • Paper types

    Resin-based paper Plastic-based paper type. The most common paper type for printing colour images as it gives greater gloss potential than fibre-based papers (e.g. supergloss on Fujiflex). R-type paper R-type papers work in the opposite way to traditional papers. A transparency (positive) is projected onto reversal paper which thus develops a positive image.

  • Polaroid

    Polaroid is a manufacturer/trademark of a photographic system which gives ‘instant’ prints, by which film, paper and developing solution are combined in one unit. As soon as the film/paper is exposed the image begins to develop, developing fully within a maximum of 5 minutes. All Polaroids on eyestorm have been professionally ‘stopped’ and removed from their…

  • Pigment-based inks

    Pigment, unlike dye, is a powder made up of tiny granules that will not dissolve completely in solution. This means that pigment-based inks leave particles of pure colour bonded to the surface of the paper that they are printed on. The resulting images can thus appear very rich and physical, densely saturated in colour –…

  • Heliogravure or photogravure

    Also known as heliogravure, photogravure is arguably the finest photomechanical means of reproducing a photograph in large editions. Copper plates are acid-etched directly from an original silver print; the etched areas then hold differing amounts of ink in order to correspond to the tones of the original print. If prints remain untrimmed, the impression of…